Close

USB Issues

< Back

Drivers
ControlMyNikon doesn’t require any custom drivers supplied by Nikon or ControlMyNikon.  Just plug in your camera via USB to your Windows PC and it works.  It has been this way since Windows XP.   Some other camera control apps require third-party USB drivers like WinUSB via the Zadig utility.  These drivers can cause connection attempts with ControlMyNikon or any other app that uses the offical Nikon SDK to fail.

Will this non-Nikon USB cable work?
We only support the use of the official Nikon USB 2.0/3.0 cable that comes with the Nikon camera. Since Nikon supports this cable, we are very sure that it will work. We do not support and cannot guarantee that non-Nikon third-party USB cables will work properly. If you are having problems while using a third-party cable, try switching back to the Nikon cable and try again to see if that helps.

I hate wires. Can we use the software with a wireless connection to the camera?
There are two types of wireless connection to Nikon cameras.

The first uses the built-in wireless features of newer Nikon bodies or Nikon accessories that enable wi-fi for the body.  ControlMyNikon does not support this method of wireless communication becuase it is not included in the official Nikon SDK.

The other method is to use wireless USB transmitter/receivers.  These just replace the USB cable and are used in various industries for remote printers and other hardware where running a USB cable is not practical.  ControlMyNikon see the wireless USB as any other wired USB connection, however live view streaming, connectivity and image download performance may be less than a wired connection.  We do not officially support this method, although some users have reported success.

Can I run the cable through a USB hub?
No. Hubs can cause unpredictable problems. Connect directly from computer to camera.

What is the maximum length of a USB 2.0 cable?
A single cable run should be no more than 16 feet in length. You can go longer than that by using ‘Active’ USB 2.0 cables or repeaters.

Last Updated On February 19, 2018